Magura Clutch Perch/Lever

$54.95
Out of stock
SKU
0605-01
Manufacturer: Magura
  • Polished alloy lever
  • Split perch clamp
  • 160 mm long
  • 8.2 mm hole for rear view mirror

Note: The hole for barrel on the Magura lever is smaller than the barrel on the stock Commando. In order to fit this lever you have three options

1 - Cut off the existing barrel and solder on the smaller barrel included with the lever

2 - Get a different clutch cable that uses the smaller barrel. Venhill makes such a cable

3 - Enlarge the barrel hole on the lever by drilling it out

Manufacturer: Magura
  • Polished alloy lever
  • Split perch clamp
  • 160 mm long
  • 8.2 mm hole for rear view mirror

Note: The hole for barrel on the Magura lever is smaller than the barrel on the stock Commando. In order to fit this lever you have three options

1 - Cut off the existing barrel and solder on the smaller barrel included with the lever

2 - Get a different clutch cable that uses the smaller barrel. Venhill makes such a cable

3 - Enlarge the barrel hole on the lever by drilling it out

Clean, small, replacement clutch perch when using non stock controls. Good match with Brembo Master cylinder

Manufacturer: Magura
Copyright © 2013-2020 Colorado Norton Works. All Rights Reserved.