cNw / Brembo Front Brake System

$1,295.00
Out of stock
SKU
0200-17
Manufacturer: cNw / Brembo

 

  • Brembo manufactured 292 mm full floating disc.
  • Stainless steel friction surface that is machined to ensure flatness. Drilled to reduce weight, run quiet and keep brake pads from glazing.
  • Carrier (center of rotor) is made from 6061 billet aluminum and then black hard anodized.
  • Silent washers allow the performance of a true full floating disc, while eliminating the noise usually associated with floaters.
  • Brembo 4 piston differential bore calipers allow for even brake wear and help prevent unnecessary brake lock-up.
  • Caliper is black anodized with red Brembo logo
  • 6061 Billet aluminum caliper (mount to fork leg) bracket is hard anodized
  • Dual o-rings. Brembo calipers are the only calipers available in the aftermarket with built-in dust seals–this ensures long caliper life.
  • Proprietary hard coating on pistons and bores. This allows for smooth movement of pistons in the bore, and eliminates scoring of the bore as well as corrosion.
  • Cycle tested to 300 years. This sounds unbelievable but it’s true! These calipers are cycle tested at Brembo’s facility to simulate 300 years of use and outdoor conditions including thermal shock, salt spray, etc.
  • 13 mm master cylinder cast in aluminum, with a black or polished alloy lever.
  • Hydraulic brake light switch mounts to your master cylinder.
  • Stainless braided brake line with stainless banjos. Available in black coated or un coated stainless braid
  • Special ARP 12 point bolts for mounting disc to your Norton hub.
  • Kit is complete with all hardware and instructions

Important Notes:

  • This system does not work with stock fender stays but we have a custom brace available
  • Right hand switch cluster will be eliminated. You can use a left side master switch like what we offer
  • For 1975 Mk3's we also offer a On/Off switch with a Starter button
  • If you want to retain your original Lucas switch cluster, we have an option for this as well (will not work on 1975 Mk3's)

Update: Brake kits are currently sold out. Making another batch and that will be available early summer. Contact me to be put on a list to be notified when available again.

Manufacturer: cNw / Brembo

 

  • Brembo manufactured 292 mm full floating disc.
  • Stainless steel friction surface that is machined to ensure flatness. Drilled to reduce weight, run quiet and keep brake pads from glazing.
  • Carrier (center of rotor) is made from 6061 billet aluminum and then black hard anodized.
  • Silent washers allow the performance of a true full floating disc, while eliminating the noise usually associated with floaters.
  • Brembo 4 piston differential bore calipers allow for even brake wear and help prevent unnecessary brake lock-up.
  • Caliper is black anodized with red Brembo logo
  • 6061 Billet aluminum caliper (mount to fork leg) bracket is hard anodized
  • Dual o-rings. Brembo calipers are the only calipers available in the aftermarket with built-in dust seals–this ensures long caliper life.
  • Proprietary hard coating on pistons and bores. This allows for smooth movement of pistons in the bore, and eliminates scoring of the bore as well as corrosion.
  • Cycle tested to 300 years. This sounds unbelievable but it’s true! These calipers are cycle tested at Brembo’s facility to simulate 300 years of use and outdoor conditions including thermal shock, salt spray, etc.
  • 13 mm master cylinder cast in aluminum, with a black or polished alloy lever.
  • Hydraulic brake light switch mounts to your master cylinder.
  • Stainless braided brake line with stainless banjos. Available in black coated or un coated stainless braid
  • Special ARP 12 point bolts for mounting disc to your Norton hub.
  • Kit is complete with all hardware and instructions

Important Notes:

  • This system does not work with stock fender stays but we have a custom brace available
  • Right hand switch cluster will be eliminated. You can use a left side master switch like what we offer
  • For 1975 Mk3's we also offer a On/Off switch with a Starter button
  • If you want to retain your original Lucas switch cluster, we have an option for this as well (will not work on 1975 Mk3's)

Update: Brake kits are currently sold out. Making another batch and that will be available early summer. Contact me to be put on a list to be notified when available again.

This is the new cNw/Brembo brake system designed to be a bolt up to the Commando hub. I re-dessigned the system that I have offered for 20 years for a slightly different apperance and have also changed the manufacturing for additional control of quality and inventory. The kit will fit onto your bike without having to do any modifications. Includes all the hardware and parts in order to make it a very straight forward installation.

This is an incredible, well-balanced brake system. Quality, fit and finish is unmatched. Transform your machine with this and experience the comfort and assurance you will feel by having a system with top level performance.

Brembo is the premier manufacturer in the world of brake systems for performance cars and bikes and they teamed up with cNw to develop what is the best possible system available for a Norton Commando

The new kit is only available in the Black finish at this time

Please see details about availability of this kit

Manufacturer: cNw / Brembo
Copyright © 2013-2020 Colorado Norton Works. All Rights Reserved.