cNw Head Mounting Kit

$199.95
In stock
SKU
0800-30
Manufacturer: cNw / ARP
  • Type 3
  • 5 ea ARP/cNw 12 point head bolts. 3/8 – 26 thread. ARP 300 series, heat-treated stainless that is rated at 180KSI (180,000 psi)
  • The 5 bolts above are also cut down in the center or ‘waisted’ in order to accurately maintain a torque
  • 3 ea ARP head studs. 3/8 – 16 x 3/8 – 24. ARP 8740 Chrome Moly rated at 190KSI. Black Oxide finish
  • 2 ea cNw front barrel studs. 5/16 – 26 x 5/16 – 24. 4140 steel, heat-treated to 40Rc
  • 2 ea cNw 12 point sleeve nuts. 3/8 – 24 thread. 17-4PH Stainless, heat-treated to 42Rc
  • 1 ea ARP 12 point nut. 3/8 – 24. ARP 300 series stainless
  • 2 ea ARP 12 point nuts. 5/16 – 24. ARP 300 series stainless
  • 5 ea ARP washers. 3/8. Stainless
  • 2 ea ARP washers. 5/16. Stainless
  • Fits both 750 and 850 cc heads

Note:  There is one modification needed in order to use that above kit and that is to install ‘heli coils’ or ‘timeserts’  to change the thread for the head studs. Those studs are prone to pull out with the stock thread size and we require that a 3/8 – 16 thread gets installed in order to use the ARP head stud. This service is available from cNw of course if you don’t have a local shop that can do this modification

Manufacturer: cNw / ARP
Click Image To Enlarge

Simply the best head mounting hardware for a Commando in the industry. cNw teamed up with ARP to develop these previously unavailable bolts with a British thread. The kit consists of stainless and high-grade steel fasteners

Manufacturer: cNw / ARP
  • Type 3
  • 5 ea ARP/cNw 12 point head bolts. 3/8 – 26 thread. ARP 300 series, heat-treated stainless that is rated at 180KSI (180,000 psi)
  • The 5 bolts above are also cut down in the center or ‘waisted’ in order to accurately maintain a torque
  • 3 ea ARP head studs. 3/8 – 16 x 3/8 – 24. ARP 8740 Chrome Moly rated at 190KSI. Black Oxide finish
  • 2 ea cNw front barrel studs. 5/16 – 26 x 5/16 – 24. 4140 steel, heat-treated to 40Rc
  • 2 ea cNw 12 point sleeve nuts. 3/8 – 24 thread. 17-4PH Stainless, heat-treated to 42Rc
  • 1 ea ARP 12 point nut. 3/8 – 24. ARP 300 series stainless
  • 2 ea ARP 12 point nuts. 5/16 – 24. ARP 300 series stainless
  • 5 ea ARP washers. 3/8. Stainless
  • 2 ea ARP washers. 5/16. Stainless
  • Fits both 750 and 850 cc heads

Note:  There is one modification needed in order to use that above kit and that is to install ‘heli coils’ or ‘timeserts’  to change the thread for the head studs. Those studs are prone to pull out with the stock thread size and we require that a 3/8 – 16 thread gets installed in order to use the ARP head stud. This service is available from cNw of course if you don’t have a local shop that can do this modification

Copyright © 2013-2017 Colorado Norton Works. All Rights Reserved.